LT-ZP05 Interlayer ƙarfin gwadawa | Gwajin ƙarfin kwasfa da aka Haɗa Hoton

LT-ZP05 Interlayer ƙarfin gwadawa | mai gwada ƙarfin kwasfa

Takaitaccen Bayani:

Ana amfani da wannan injin gwajin ne don ƙarfin bawon takarda na kwali, wato ƙarfin haɗin gwiwa tsakanin filayen saman takarda, don gwada ƙarfin kuzarin gwajin kwali bayan wani tasirin Angle da nauyi, da kuma nuna ƙarfin kwali kwali. Ma'auni na aiki da alamun fasaha na kayan aiki sun dace da daidaitattun tanadi kamar hanyar ƙaddarar ƙarfin haɗin gwiwa na UM403 wanda Scott na Amurka ya gabatar, wanda ya fi dacewa don ƙayyade ƙarfin haɗin gwiwa tsakanin nau'in takarda daban-daban. . Yana da manufa gwajin kayan aiki ga takarda tube samar Enterprises, ingancin gwajin cibiyoyin da sauran sassan. Ya dace don gwada ƙarfin peeling na allunan takarda daban-daban.

Aika mana imel

Cikakken Bayani

Tags samfurin

Siffofin fasaha

1. Yawan gwajin gwaji: ƙungiyoyi 5

2. Yawan aiki: 0.25 / 0.5 kg-cm

3. Ƙimar karantawa mafi ƙarancin: 0.005 kg-cm

4. Girma: 70*34*60cm

5. Nauyi: 91kg

Tsarin jujjuya raka'a:

LB * FT/in2 = (0.3048 m)/(N) 4.41 * 2 = 2083 j/m2 (0.0254)

LB=4.41N FT=0.3048m IN=0.0254m 1J=1N x 1M

Ƙimar nuni na panel shine * 1000, kuma 500 daidai shine 0.5 LB.FT / in2, don haka panel 1 = 2083/1000 = 2.083

Test falsafa

Ƙarfin da gunkin gwajin allo ke ɗauka bayan wani kusurwa da nauyi ya yi masa tasiri, kuma yana nuna ƙarfin bawon allo tsakanin yadudduka. Za a iya auna ƙungiyoyi biyar na alamu a lokaci ɗaya, kuma sakamakon ya hadu da nau'o'in ma'auni (kg / cm, N / m, J).

Pmanufa manufa

Gwada ƙarfin da gunkin gwajin allo ya ɗauka bayan wani kusurwa da nauyi ya yi tasiri, kuma nuna ƙarfin kwasfa na allo tsakanin yadudduka.

Daidaitawa

Saukewa: TAPPI-UM403

Na baya: LT-ZP04 Electric takarda tube matsa gwajin inji | Injin gwajin matsawa takarda bututu

Na gaba: LT-ZP07 Ring matsa lamba samfurin sabon inji