Na'urar Gwaji Mai Dorewa Ta Kujerar Ofis LT-JJ13-1 da Na'urar Gwaji Mai Dorewa Ta Kujerar Baya (Tasha ɗaya) Hoton da aka Fito

Injin Gwaji Mai Dorewa na Kujerar Ofis da Na'urar Gwaji ta LT-JJ13-1 (Tasha ɗaya)

Takaitaccen Bayani:

Wannan Injin Gwaji Mai Dorewa na Kujera da Kujera na Ofis mai tasha ɗaya yana kimanta ingancin tsarin na dogon lokaci da juriyar gajiya na duka wurin zama da wurin zama. Yana kwaikwayon zagayowar zama, lodi, da jingina akai-akai don tantance dorewar abu, kwanciyar hankali na firam, da amincin haɗin gwiwa bisa ga ƙa'idodin masana'antu kamar BIFMA.

TAMBAYI KYAUTAR KYAUTA

Cikakken Bayani game da Samfurin

Alamun Samfura

Sigogin samfurin
1	Kushin lodawa na saman kujera	Abu mai tauri mai siffar siffa mai siffar concave-convex ta halitta, 38049575mm
2	Gudun gwaji	Sau 1 zuwa 30 a minti daya
3	Yankin farantin tushe	1200*1100mm
4	Tushen iskar gas	0.4-0.6 megapascals
5	Firikwensin	500kg
6	ƙudurin tantanin lodawa	3/10000.
7	Daidaiton gwaji	Tsaye: ±2% Ƙarfin aiki: ±3%
8	Nauyin injin	320kg
9	Adadin gwaje-gwaje	Ana iya saita shi ba tare da wani tsari ba daga 0 zuwa 999,999 sau
10	Tushen wutan lantarki	220V/50Hz, 5A
11	Ƙwaƙwalwar kashe wuta	Yana da aikin kashe ƙwaƙwalwa da kuma kashewa bayan an gano wurin da aka samu matsala. Sakamakon gwajin zai kasance ta atomatik idan na'urar ta tsaya ko kuma aka yanke wutar lantarki a tsakiya. Fitar da bayanai zuwa kwamfuta ta hanyar USB.
12	Hanyar kashewa	Za a kashe na'urar kuma za a kunna ƙararrawa idan an kai adadin gwaje-gwajen.
13	Tsarin asali yana ɗaukar tsarin aiki mai ƙarfi na ƙarfe mai ƙarfi na aluminum, kuma tsarin ƙasa yana amfani da tsari mai girma uku, wanda yake da karko.
14	Tushe	Bayanan aluminum masu ƙarfi na masana'antu + daidaitaccen ƙarfe na ƙasa 45 #, kauri ≥10mm, tare da maganadisu masu ƙarfi don daidaita samfurin.
15	Yanayin sarrafawa	Kula da allon taɓawa na PLC.
16	Girma	Tsawon 1320mm* Faɗi 1480mm* tsayi 2100mm.