LT – BZN01-SA Servo system carton compression tester / Carton compression tester
|
Technical parameters |
|
| 1. Capacity selection: 500kg,1000kg,2000kg, 5000kg, 10000kg, 20000 kg, 50000 kg | |
| 2. Degree of decomposition: 1/100,000 | |
| 3. Accuracy: within ±3/1000 | |
| 4. Test space: 800*800*800mm, 1000*1000*1000mm, 1200*1200*1200mm, 1500*1500*1200mm (or specified) | |
| 5. Compression speed standard: 0.01-300mm/min, | |
| 6. Screw: ball screw | |
|
|
| 8. Accuracy of deformation indication: better than ±1.0% | |
| 9. Shutdown mode: upper and lower limit safety setting, emergency stop key, program force and elongation setting, specimen failure sensing | |
| 10. Unit switching: all kinds of international common units can be arbitrarily switched | |
| 11. Annex: operating instructions, delivery inspection report and warranty card | |
| 12. Motor: panasonic servo motor, Japan | |
| 13. Software system: universal pressure high-precision system | |
| 14. Support double column: advanced aluminum alloy material | |
| 15. Color of compression machine: white column, black frame | |
| 16. Computer control, pressure curve display | |
| 17. Special functions: tension and pressure holding test | |
| 18. Protection device: including up and down stroke control switch, the program sets the maximum load, maximum extension, automatic stop emergency switch, the drive motor is a servo motor, completely controlled by the computer speed and travel, different from the traditional AC, DC motor by voltage control, need to be controlled in different sections. | |
|
Conform to the standard |
|
| tappi-804 | JIS20212 |
| GB/T4857 | |
Write your message here and send it to us
