I-LT-ZP44 Ukudibanisa umbala wesphere | Ukudibanisa umbala wesphere

Inkcazo emfutshane:

Ii-colorimeters ezidibanisa iisphere zenzelwe ukubonelela ngolwazi olukhawulezayo noluchanekileyo lokulinganisa imibala kwizinto ezahlukeneyo ezifana nephepha, ii-coating, iiplastiki kunye neendwangu. Ukulinganisa okupheleleyo nokwahlukileyo kungenziwa kwiinkqubo ezilandelayo ze-colorimetric, kuquka: L*a*b*, ∆L*∆a*∆b•, L*c*h˚, ∆L•∆C*∆H*, ∆E*ab, ∆ECMC, ∆E CIE94, XYZ, amaxabiso amhlophe natyheli ngokwe-ASTM E313-98. Imo ye-“Item” exhotyiswe ngokukodwa kunye noluhlu olubanzi lwe-apertures zokulinganisa zenzelwe ukuhlangabezana nokusebenza kunye nokusebenza okufunekayo kwiindlela ezahlukeneyo zokulinganisa imibala.

CELA IXABISO LASIMAHLA

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iiparameter zobugcisa

1. Iimeko zokukhanyisa/zokulinganisa: D/8 (ukukhanya okusasazekayo, ukwamkelwa kwe-8°)

2. Inzwa: uluhlu lwe-photodiode

3. Ukudibanisa ububanzi bebhola: 40mm

4. Izixhobo zokwahlula iiSpectrum: i-diffraction grating

5. Uluhlu lobude bomda wokulinganisa: 400nm-700nm

6. Isithuba sobude bomda wokulinganisa: 10nm

7. Ububanzi besiqingatha segagasi: <=14nm

8. Uluhlu lokulinganisa ukubonakalisa: 0-200%, isisombululo: 0.01%

9. Umthombo wokukhanyisa: isibane se-LED esidityanisiweyo

10. Ixesha lokulinganisa: malunga nemizuzwana emi-2

11. Ububanzi bokulinganisa: 8MM

12. Ukuphinda-phinda: 0.05

13. Umahluko phakathi kwezitishi: 0.5

14. Umjongi oqhelekileyo: 2° ukubukela i-Engela, 10° ukubukela i-Engela

15. Jonga umthombo wokukhanya: A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (imithombo yokukhanya emibini ingakhethwa ngexesha elinye ukuze iboniswe)

16. Bonisa umxholo: idatha ye-spectral, imephu ye-spectral, ixabiso le-chrominance, ixabiso lomahluko wombala, ukupasa/ukungaphumeleli, ukulinganisa umbala

Isalathisi sendawo yombala/se-chroma:

L*a*b*, L*C*h, CMC(1:1), CMC(2:1), CIE94, HunterLab, Yxy, Munsell, XYZ, MI, WI(ASTME313/CIE), YI(ASTME313/ASTMD1925),

Ukukhanya kwe-ISO(ISO2470), Uxinano imekoA/T, CIE00, WI/Tint

18. Indawo yokugcina: 100*200 (amaqela ali-100 eesampuli ezisemgangathweni, iqela ngalinye leesampuli ezisemgangathweni lingaphantsi kweerekhodi zovavanyo ezingama-200 eziphezulu)

19. Ujongano: i-USB

20. Umbane: ibhetri ye-lithium esuswayo eyi-1650 mAh,

Iadaptha ye-AC ezinikeleyo eyi-90-130VAC okanye i-100-240VAC, 50-60 Hz, Ubuninzi. 15W

21. Ixesha lokutshaja: malunga neeyure ezi-4 – umthamo we-100%, inani leemilinganiselo emva kokutshaja ngakunye: iimilinganiselo ezili-1,000 ngaphakathi kweeyure ezi-8

22. Ubomi bomthombo wokukhanya: malunga nemilinganiselo engama-500,000

23. Uluhlu lobushushu bokusebenza: 10 ° C ukuya kuma-40 ° C (50 ° ukuya kuma-104 ° F), 85% ubushushu obuphezulu (akukho kufuma)

24. Uluhlu lobushushu bokugcina: -20 ° C ukuya kuma-50 ° C (-4 ° ukuya kuma-122 ° F)

25. Ubunzima: Malunga ne-1.1 kg (2.4 lb)

26. Ubukhulu: malunga ne-0.9 cm *8.4 cm *19.6 cm (Ububanzi * Ububanzi) (4.3 intshi *3.3 intshi *7.7 intshi)

PimvelisoFukutya

1. Ukusetyenziswa ngokubanzi: ingasetyenziswa kwilebhu, kumzi-mveliso okanye ekusebenzeni kwentsimi.

2. Kulula ukubala: isiboniso esikhulu se-LCD esinemizobo.

3. Uthelekiso lombala olukhawulezayo: Ivumela ukulinganiswa okukhawulezileyo kunye nothelekiso lwemibala emibini ngaphandle kokudala ukunyamezelana okanye ukugcina idatha.

4. Imo ekhethekileyo "yeProjekthi": Imigangatho emininzi yemibala inokuqokelelwa njengenxalenye yenkqubo yemigangatho yemibala yenkampani ngendlela enye eyaziwayo

Phantsi kweprojekthi.

5. Imo yokupasa/yokuhluleka: Imigangatho yokunyamezelana efikelela kwi-1,024 ingagcinwa ukuze kube lula ukulinganisa ukupasa/ukuhluleka.

6. Ubungakanani obahlukeneyo bomngxuma wokulinganisa, ukuze kuhlengahlengiswe kwiindawo ezahlukeneyo zokulinganisa, kubonelela ngendawo yokulinganisa ukusuka kwi-4 mm ukuya kwi-14 mm.

7. Ukuhambelana phakathi kwezixhobo: ukuhambelana okungaqhelekanga ukuqinisekisa ukuhambelana kolawulo lombala wezixhobo ezininzi.

8. Isixhobo singasebenzisa imibala, ukuthamba, kunye nokubala kwe-tri-stimulus ukulinganisa ukugquma, ubungakanani bombala, kwaye sinokujolisa kwiplastiki,

Ulawulo oluchanekileyo lombala kwiimveliso zesitshizi okanye zezinto zelaphu lwenza umsebenzi wokwahlulahlula ukukhanya kombala we-555.

9. Imiphumo yobume kunye nokukhazimla: Ukulinganisa ngaxeshanye kuquka ukubonakaliswa okucacileyo (umbala wokwenyani) kunye nokukhutshwa kwedatha yokubonakaliswa okucacileyo (umbala womphezulu),

Nceda uhlalutye impembelelo yesakhiwo somphezulu wesampuli kumbala.

10. I-ergonomics ekhululekileyo: Intambo yesandla kunye nezibambo eziphathwayo ecaleni kulula ukuzibamba, ngelixa isiseko ekujoliswe kuso sinokujikwa ukuze kube lula ngakumbi.

11. Ibhetri etshajwayo: Vumela ukusetyenziswa kude.

Ngaphambili: Umvavanyi wokuthamba kwephepha we-LT-ZP43 | Umvavanyi wokuthamba kwephepha

Okulandelayo: LT-WJ01 EN Umgangatho wovavanyo lokuwisa / EN Umgangatho wokwehla

Bhala umyalezo wakho apha uze uwuthumele kuthi