LT-JJ29-B Na'ura mai kwakwalwa GB katifa mirgina, blanking da altimeter tester (mirgina + blanking + altimeter)
| Siffofin fasaha |
| 1. Yanayin sarrafawa: sarrafa kwamfuta |
| 2. Na'urar gwajin dorewa ta Pavement: 1) na'urar injiniya wanda zai iya fitar da abin nadi don yin motsi a kwance a saman katifa: lokacin juyawa na inertia na abin nadi shine (0.5 ± 0.05) Kgm2, mitar lodi ya kamata ( 16 ± 2) sau / min, matsakaicin nauyin ya kamata ya zama (1400 ± 7) N, kuma lokutan gwaji sune> 30000 sau. 2) nadi: m siffar, waje girma haƙuri ne ± 2mm, da surface ya zama mai wuya, santsi, ba tare da scratches ko sauran surface lahani, tsawon (1000 ± 2) mm, gogayya coefficient tsakanin (0.2 ~ 0.5), chamfering Angle na nadi. : R30, matsakaicin diamita na abin nadi: 300± 1mm; 3) mota: panasonic servo motor na Japan; 4) balaguron gwaji: game da 250mm na tsakiyar layin katifa; 5) daidaiton na'urar ma'auni mai ƙarfi ba zai zama ƙasa da 1% ba, daidaiton girman na'urar ba zai zama ƙasa da 1mm ba, kuma karkacewar matsayi na toshe kayan aiki ya zama ± 5mm. |
| 3. Side durability gwajin na'urar: 1) loading kushin size: 380 * 495 * 75mm.Fuskokinsa yana da wuya da santsi.An haɗa shi da kayan aikin gwaji kuma yana iya juyawa a saman tsaye a kusa da axis na kwance 2) Ƙarfin lodin ƙasa a tsaye: 1000N 3) jimlar adadin gwaje-gwaje: 5000 4) rikon lokaci |
| 4. Na'urar aunawa tsayi: 1) daidaitattun ma'auni: ± 0.5mm; 2) ma'aunin ma'auni mai tsayi: filin aunawa shine silinda mai laushi da santsi; 3) diamita na auna kushin: 100mm, chamfering R10; 4) saurin aikace-aikacen kushin: 100 ± 20mm / min; 5) Ƙarfin ƙasa a tsaye: yi amfani da ƙarfin 4N, to, nisa tsakanin farfajiyar da ke ƙasa da murfin madauwari da farantin shine tsayin kushin katifa;Tsawon tsayi: tsayin saman katifa na farko, sau 100, sau 29,900 na gwajin haƙuri, bi da bi auna tsayin saman katifa;Tsarin Altimeter: ana saita ƙimar ƙarfi ta software, ana amfani da ƙarfi a tsaye ƙasa ta hanyar saita saurin, kuma ana haɗa shi kai tsaye zuwa allon taɓawa na PLC. |
| 5. Matsakaicin samfurin gwajin gwaji: 2400mm × 2400mm × 440mm |
| 6. Gwajin tebur abu: bakin karfe |
| 7. Tsayin gwajin gwajin daga ƙasa: 180mm |
| 8. Girman waje: 3320*2400*2280mm (tsawon * nisa * tsawo) |
| 9. Nauyi: kimanin tan 2.3 |
| 10. Samar da wutar lantarki da wutar lantarki: AC2201V 50HZ guda-lokaci game da 2KW |
| Siffofin samfur |
| 1. Kayan aiki sun haɗu da hanyoyin gwaji guda uku: gwajin juriya mai jujjuyawa, gwajin dorewa mai ƙarfi da gwajin tsayin kushin. |
| 2. Ana iya samun cikakken sakamakon gwajin atomatik ta hanyar sarrafa kwamfuta.Yanayin gwaji guda biyu cikakken aiki ne ta atomatik da sarrafa hannu tare da maɓalli ɗaya. |
| 3. Ana ɗaukar tsarin injin gantry a cikin gwajin ƙarfin juriya na shinge, tare da babban motar servo mai ɗaukar nauyi da madaidaiciyar madaidaiciyar madaidaiciyar madaidaiciyar madaidaiciyar hanya azaman sassan tuki;Bukatar amfani da sanannen alamar taɓawa ta alama azaman sarrafa shigarwa, sanya ikon sarrafa aiki ya zama ɗan adam da taƙaitacce. |
| 4. Nadi loading na pavement dorewa gwajin daukan mikakke zamiya hali don free loading;A cikin gwajin karɓuwa, ana amfani da toshe mai ɗaukar nauyi da ɗaukar nauyi na linzamin kwamfuta don ɗaukar kaya kyauta, saboda juzu'in jujjuyawar layin layi kawai ya wanzu, don haka ana iya tabbatar da daidaiton ƙarfin lodi.Sabili da haka, ƙarfin lodi ya fi dacewa da daidaitattun buƙatun. |
| 5. Kyawawan kyan gani da kyan gani: cikakken ɓoyayyiyar wayoyi, don hana yaɗuwa yayin aiki da haɗarin kowane tsarin samar da wutar lantarki;An yi farfajiyar da aka yi da bakin karfe, tare da santsi mai laushi, dacewa don ɗaukar katifa;Cikakken tushe farantin karfe, babu buƙatar naushi don gyara ƙasa, cikakken tabbatar da cewa kayan aiki baya motsawa, kar a girgiza. |
| 6. Gwajin tsayin kushin gwajin ana amfani da motar servo azaman tuƙi don gwadawa a saurin da aka ƙayyade a cikin ma'auni, nuna jadawali mai lanƙwasa tsakanin ƙimar ƙarfin da aka matsa ta kushin kaya akan samfurin da ƙimar sag mai dacewa, kuma ta atomatik auna ta atomatik. tsawo. |
| 7. An yi abin nadi na musamman tare da juriya mai kyau, m surface, babu fasa, babu nakasawa da kuma dogon sabis rayuwa. |
| 8. Mirgina gwajin matsakaicin matsayi, ta atomatik nemo tsakiyar madaidaicin katifa, babu buƙatar sakewa da hannu, PLC fara ma'auni. |
| 9. Tsarin kulawa na ɗan adam, mai sauƙi mai sauƙi, cikakkun ayyuka, amsa mai sauri na allon taɓawa, mai sauƙin aiki. |
| 10. Za a iya buga sakamakon gwajin ta firinta bisa ga tsarin fayil ɗin da abokin ciniki ke buƙata. |
| 11. Kariyar bayanai: adana ta atomatik lokacin da wuta ke kashe (ana iya adana bayanai ta atomatik bayan an kashe wuta). |
| 12. An haɗa tushe ta babban ƙarfin masana'antu aluminum profile da bakin karfe SUS304 pavement, m da kuma bakin ko'ina cikin shekara. |
| 13. Cantilever inji tsarin da aka soma a cikin gefe durability gwajin, da kuma pneumatic loading na watsa sassa da ake amfani da inganta inji ƙarfi da stiffness na dukan inji, ƙara da sabis rayuwa da daidaito na gwajin data, da kuma yadda ya kamata rage gudu amo. |
| 14. CNC machined daidaitattun daidaito, bayyanar zai iya mafi kyau yin la'akari da kayan aikin injiniya na jikin mutum. |
| 15. Software yana da nunin lanƙwan gajiya yayin aikin nadi na nadi, wanda zai iya gani da idon basira nazarin gajiyawar katifa a ƙarƙashin abin nadi. |
| Yi daidai da ma'auni |
| Kayan aiki ya dace da GB/T 26706-2011 "katifa mai laushi mai launin ruwan kasa mai laushi";TS EN 1957: 2012 Abubuwan buƙatun don gwajin inji |
3 ± 1) ku
