Gwajin Karce na Fata LT-XZ30-12
Ya dace da ƙa'idodi
Ya cika buƙatun da suka dace na ƙa'idodin BS-3144 da JIS-K6545.
sigar fasaha
Sigogi na fasaha na gwajin juriya ga karce na fata na LT-XZ30-12:
1. Adadin kayan aiki: Saiti 12;
2. Zafin gwaji: zafin ɗaki;
3. Kusurwar motsi ta ƙasa ta na'urar da ke sama ita ce (22.5 ± 0.5) °, kuma saurin motsi shine (100 ± 5) sau/minti;
Na'urar da ke saman ta ƙunshi faranti biyu na ƙarfe masu faɗi waɗanda ke juyawa a kusa da wani axis. Na'urar da ke saman tana motsawa ta hanyar injin kuma tana motsawa gaba da gaba tare da axis mai kwance.
4. Ƙarfin da ke ƙasa da na sama suna cikin jirgin sama ɗaya. Idan gefen EF na saman ya kasance a kwance, nisan da ke tsakanin gefen sama na ƙasa da gefen EF na saman ya zama (25.0 ± 0.5) mm;
Ƙashin da ke ƙasan na'urar an yi shi ne da faranti biyu na ƙarfe masu lebur, waɗanda aka gyara a ƙarƙashin na'urar saman, a cikin jirgin sama ɗaya da na sama, don gyara samfurin.
5. Kayan haɗi:
1) Na'urar ɗaukar samfur ta yau da kullun: tare da girman 70mm a tsayi da 45mm a faɗi, guda 3, bisa ga ƙa'idodin QB/T 2707-2005;
2) Gilashin ƙara girma: yana iya ƙara girma sau 4 zuwa 6;
3) Injin busarwa: injin busarwa wanda za a iya kwashewa;
4) famfon injin tsotsa: zai iya rage matakin injin tsotsa a cikin na'urar busar da kaya zuwa ƙasa da 4kPa;
5) Faifan gilashi: ƙaramin diamita 100mm, ƙaramin zurfin 25mm;
6) Agogon gudu, tare da daidaito na 0.01s;
6. Ma'aunin Kati: Ana iya saita allon LCD, lokutan gwaji 0-999999 ba tare da wani tsari ba, wanda ke nuna adadin motsi;
7. Nauyi: Kimanin kilogiram 78.
