Mai gwajin tauri na LT-ZP24
| Sigogi na fasaha |
| 1. Kewayon aunawa: 15 ~ 300mN.m |
| 2. Daidaito: ±0.6mN ƙasa da 50mN, sauran ±1% |
| 3. ƙuduri: 0.1mN |
| 4. Yana nuna bambancin ƙima: ≤1% |
| 5. Tsawon lanƙwasawa: guda shida masu daidaitawa: (50/25/20/15/10/5 ±0.1)mm |
| 6. Kusurwar Lanƙwasa: (±7.5º ko ±15º) (1-90° ana iya daidaitawa) |
| 7. Tsawon maƙallin kaya: 200° ±20°/min |
| 8. Saurin lanƙwasawa: 7.5s ~ 35s daidaitacce |
| 9. Nunin bayanai: Nunin lu'ulu'u mai inci 5.7, tare da nuni mai lanƙwasa |
| 10. Fitar da bugu: firintar zafi mai haɗaka ta zamani |
| PsamfurinFcin abinci |
| Gwajin tauri na 1.7.5° da 15° ((1 ~ 90)°; Ana iya gwada matsi da tauri. |
| 2. Tare da aikin gwaji na atomatik sifili. |
| 3. Motar tana da cikakken iko kan canjin kusurwar gwaji, wanda ke inganta ingancin aunawa kuma yana rage tasirin ɗan adam. |
| 4. Ana iya gwada nau'ikan tsayin lanƙwasa guda uku: 50mm, 25mm, 10mm. |
| 5. Tare da ƙididdigar ma'auni, bugawa da sauran ayyuka, lokacin aunawa, ana iya saita kusurwa. |
| 6. Bayan kammala gwajin, koma wurin farawa a babban gudu, kuma ana iya saita saurin dawowa tsakanin (7.5 ~ 35) ba tare da wani sharaɗi ba. |
| 7. Tsarin aikin injin mutum yana amfani da babban allon LCD mai lanƙwasa inci 5.7, ƙarfin nunin a ainihin lokaci da lanƙwasa lokaci, aiki mai sauƙi da dacewa. |
| 8. Kayan aikin yana da ayyukan gwaji, nunawa, ƙwaƙwalwa, ƙididdiga da buga sigogi daban-daban da aka haɗa a cikin ma'aunin, yana ba da nazarin bayanan kimiyya don gano taurin lanƙwasa kwali. |
| Daidaitacce |
| Daidai da GB/T 2679•3 "Ƙaddamar da taurin takarda da allo", GB/T 23144 "Ƙaddamar da taurin takarda da allo mai tsauri Ka'ida ta gaba ɗaya". |
Rubuta saƙonka a nan ka aika mana da shi
