LT-JJ80 Cabinet door hinge comprehensive test machine

Short Description:

Product Detail

Product Tags

Product parameters
1	Test speed	1-18 times per minute (adjustable)
2	Testing station	It can be moved left and right, suitable for cabinets with left or right doors, and can be used for testing finished cabinet doors or individual hinges (tooling required)
3	Test fixture	Detachable and movable up and down, the test door complies with the standard requirements (as shown in the following figure), suitable for testing cabinets of different heights (maximum sample approximately: 18001900550mm)
4	Test Angle	Adjustable from 0 to 180° for the servo.
5	Drive unit	High-precision servo motors are adopted
6	Machine frame	Made of high-strength industrial aluminum profiles of 80*80mm
7	Weight-bearing weights	1kg,2 pieces
8	Loading	0-500N (Load shutdown can be set, only for evaluation purposes)
9	Absolute error of the measured stroke	≤±0.25m
10	Travel control range	0.05 to 99.9km, 0.25m on the scale
11	Absolute error of measurement time	0.1 seconds
12	Durability test	Place a certain load on the cabinet door and hinges, and perform repeated opening and closing actions. After a certain number of cycles, check whether the hinges can still meet the usage requirements.
13	Vertical static load	Suspend the specified load 100mm from the farthest side of the cup-shaped concealed hinge, and open and close the door back and forth 10 times. Each time, from a distance of 45 degrees from the fully closed position to a distance of 10 degrees from the fully open position, one round trip is not counted as one time. The maximum opening Angle is 135 degrees from the fully closed position.
14	Horizontal static load	At the fully open position of the door, apply the specified load to the horizontal center line 100mm away from the side of the cup-shaped concealed hinge in the direction perpendicular to the door plane. Conduct the test 10 times. After unloading at the end of the test, carry out an inspection.
15	Control mode	PLC+ human-machine interface
16	Dimensions	Length 2060mm× Width 1500mm× height 2600mm
17	Power supply	220V,5A