Umatshini wokuvavanya ukuxinana othe tye we-LT-LLN02-W

Inkcazo emfutshane:

Lo matshini wokuvavanya ukuxinana othe tye wenzelwe ukwenza uvavanyo lokuxinana, ukuxobula, ukukrazula, kunye nokuguquguquka kwezinto kunye nezinto. Ulwakhiwo lwayo oluthe tye lufanelekile ngokukodwa ukuvavanya iisampuli ezinde, iifilimu, amalaphu, iingcingo, kunye neemveliso ezithile eziqinileyo ezifuna indlela yokulayisha ethe tyaba. Inkqubo inika ulawulo lwamandla oluchanekileyo, olucwangcisiweyo kunye nolawulo lokufuduka kwaye ihlangabezana nemigangatho efana ne-ASTM, ISO, kunye ne-GB yovavanyo oluchanekileyo lwepropathi yoomatshini.

CELA IXABISO LASIMAHLA

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iiparamitha zemveliso
1	Inqanaba lomatshini wokuvavanya	Ibanga loku-1
2	Isalathisi samandla ovavanyo	Ixabiso eliphezulu: 300kN Uluhlu lokulinganisa: 0.4% ukuya kwi-100% Ukuchaneka: Kungcono kune ± 1% yexabiso elibonisiweyo Isisombululo: ± iikhowudi ezingama-300,000
3	Ukufuduka	Ukuchaneka komlinganiselo: Kungcono kune ± 1% yexabiso elibonisiweyo Isisombululo: 0.001mm
4	Isantya	Uluhlu: 0.005mm/min ukuya kwi-200mm/min ummiselo wesantya ongenazinyathelo Ukuchaneka: Kungcono kune ± 1% yexabiso elibonisiweyo
5	Iiparamitha zomsingathi	Ukubetha okuzolulayo: 2500mm Indawo yovavanyo: 10,000mm Ububanzi bovavanyo: 500mm
6	Indawo yokusebenza	Ubushushu begumbi 10 ukuya kwi-35℃, umswakama 20% ukuya kwi-80%
7	Uluhlu lohlengahlengiso lwesantya olulawulwa ngamandla	0.005- 5%Fs/s
8	Ukuchaneka kolawulo lwesantya olulawulwa ngamandla	Xa izinga lingaphantsi kwe-0.05%Fs, lingaphakathi kwe-±1% yexabiso elibekiweyo. Xa izinga lingaphezulu kwe-0.05%Fs, lingaphakathi kwe-±0.5% yexabiso elibekiweyo.
9	Uluhlu lohlengahlengiso lwezinga lokuguqulwa	0.02 ukuya kwi-5%Fs/s
10	Ukuchaneka kolawulo lwezinga lokuguqulwa	Xa izinga lingaphantsi kwe-0.05%Fs, lingaphakathi kwe-±1% yexabiso elibekiweyo. Xa izinga lingaphezulu kwe-0.05%Fs, lingaphakathi kwe-±0.5% yexabiso elibekiweyo.
11	Ukuchaneka kolawulo lwezinga lokufuduka	Xa izinga lingaphantsi kwe-0.01mm/min, lingaphakathi kwe-±1% yexabiso elibekiweyo. Xa izinga lingaphezulu kwe-0.05mm/min, lingaphakathi kwe-±0.2% yexabiso elibekiweyo.
12	Amandla angapheliyo, ukufuduka rhoqo kunye noluhlu lolawulo lokuguqulwa rhoqo	0.5% ukuya kwi-100%Fs
13	Ukuchaneka kolawulo lwamandla angaguqukiyo, ukufuduka okungaguqukiyo kunye nokuguquguquka okungaguqukiyo	Xa ixabiso elibekiweyo liyi-≥10%Fs, lingaphakathi kwe-±0.1% yexabiso elibekiweyo. Xa izinga lingaphantsi kwe-10%Fs, liyi-±1% yexabiso elibekiweyo

Umgangatho
1	GB/T228.1-2010 “Indlela yoVavanyo loVavanyo lokuThamba kwezinto zesinyithi kubushushu begumbi
2	GB/T7314-1987 “Indlela yoVavanyo lokuCindezelwa kweeMetali”