Umshini wokuhlola ukujiya ovundlile we-LT-LLN02-W Isithombe Esivelele

Umshini wokuhlola ukuthambekela ovundlile we-LT-LLN02-W

Incazelo emfushane:

Lo mshini wokuhlola ukuthambekela okuvundlile wenzelwe ukwenza ukuhlolwa kokuthambekela, ukuhlubula, ukudabula, kanye nokugoba ezintweni zokwakha kanye nezingxenye. Ukucushwa kwawo okuvundlile kufaneleka kakhulu ekuhlolweni kwezibonelo ezinde, amafilimu, izindwangu, izintambo, kanye nemikhiqizo ethile eqinile edinga indlela yokulayisha eyisicaba. Uhlelo luhlinzeka ngamandla aqondile, angahlelwa kanye nokulawula ukufuduka futhi luhlangabezana nezindinganiso ezifana ne-ASTM, ISO, kanye ne-GB zokuhlola impahla yemishini okunembile.

CELA ISIKHOKELO SAMAHHALA

Imininingwane Yomkhiqizo

Amathegi Omkhiqizo

Amapharamitha omkhiqizo
1	Ibanga lomshini wokuhlola	Ibanga 1
2	Inkomba yamandla okuhlola	Inani eliphezulu: 300kN Ububanzi bokulinganisa: 0.4% kuya ku-100% Ukunemba: Kungcono kune-± 1% yenani elibonisiwe Isixazululo: ± amakhodi angu-300,000
3	Ukufuduka	Ukunemba kokulinganisa: Kungcono kuno-± 1% wenani elibonisiwe Isixazululo: 0.001mm
4	Isivinini	Ububanzi: 0.005mm/min kuya ku-200mm/min ukulawulwa kwesivinini okungenazinyathelo Ukunemba: Kungcono kune-± 1% yenani elibonisiwe
5	Amapharamitha okusingatha	Ukuphakama kokwelula: 2500mm Isikhala sokuhlola: 10,000mm Ububanzi bokuhlola: 500mm
6	Indawo yokusebenza	Izinga lokushisa legumbi 10 kuya ku-35℃, umswakama 20% kuya ku-80%
7	Ububanzi bokulungiswa kwesilinganiso esilawulwa ngamandla	0.005- 5%Fs/s
8	Ukunemba kokulawula izinga elilawulwa ngamandla	Uma izinga lingaphansi kuka-0.05%Fs, lingaphakathi kuka-±1% wenani elibekiwe. Uma izinga lingaphezu kuka-0.05%Fs, lingaphakathi kuka-±0.5% wenani elibekiwe.
9	Ububanzi bokulungiswa kwesilinganiso sokuguquguquka	0.02 kuya ku-5%Fs/s
10	Ukunemba kokulawula izinga lokuguqulwa	Uma izinga lingaphansi kuka-0.05%Fs, lingaphakathi kuka-±1% wenani elibekiwe. Uma izinga lingaphezu kuka-0.05%Fs, lingaphakathi kuka-±0.5% wenani elibekiwe.
11	Ukunemba kokulawula izinga lokufuduka	Uma izinga lingaphansi kuka-0.01mm/min, lingaphakathi kuka-±1% wenani elibekiwe. Uma izinga lingaphezu kuka-0.05mm/min, lingaphakathi kuka-±0.2% wenani elibekiwe.
12	Amandla aqhubekayo, ukufuduka okuqhubekayo kanye nobubanzi bokulawula ukusonteka okuqhubekayo	0.5% kuya ku-100%Fs
13	Ukunemba kokulawula kwamandla angaguquki, ukufuduka okungaguquki kanye nokuguquguquka okungaguquki	Uma inani elibekiwe lingu-≥10%Fs, lingaphakathi kuka-±0.1% wenani elibekiwe. Uma izinga lingaphansi kuka-10%Fs, liyi-±1% yenani elibekiwe

Okujwayelekile
1	GB/T228.1-2010 “Indlela Yokuhlola Yokuhlola Izinto Zensimbi Eziqinile Emazingeni Okushisa Egumbini
2	GB/T7314-1987 “Indlela Yokuhlola Yokucindezela Izinsimbi”