page

Products

Faucet & Tap Endurance Test Bench LT-WY105

Short Description:

This faucet & tap endurance test bench verifies the working life of conventional, thermostatic and non-contact (touchless) faucets, covering single-control, dual-control and double-handle configurations, plus bath lift mechanisms, rotating spouts, pull-out faucets, shower function switching, shower ball-joint swing, and switching and ball-joint swing forces. Modular fixtures allow flexible combination, raising the machine’s utilization and throughput across a full product range.
The bench is instrumented with a 0–1.0 MPa pressure sensor at 0.2 class, an electromagnetic flow meter at 0.5 class (50 L/min)​, Class A temperature sensors, a servo torque system (0–6 N·m, ±0.1 N·m, 0.5 class)​, a tension/compression force sensor, and displacement accuracy of ±0.5 mm or ±0.5° with action speeds adjustable from 0.5°/s to 65°/s. A high-precision servo drive rotates the valve spindle and auto-calculates the cartridge angle and centre position. Testing is performed to ASME A112.18.1 / CSA B125.1, EN 200, EN 817, EN 1111, EN 246, GB 18145, GB/T 41863, CJ/T 194, AS 3718, SANS 226, TISI 2067 and SASO EN 246.


Product Detail

Product Tags

Product Advantages

  • Multi-Standard Simultaneous Testing – Independent supply and control per station let different standards run at once, each holding its required pressure, temperature and flow.
  • Precise Independent Hot/Cold Supply – Dedicated variable-frequency pumps with separate chiller and heater deliver 5–30 °C cold and ambient–90 °C hot water at 0.1 °C control.
  • Full Handle and Mechanism Coverage – Single, dual and double handle, bath lift, rotating spout, pull-out and shower function switching all test on one modular platform.
  • 0.2-Class Pressure, 0.5-Class Flow – High-accuracy pressure and electromagnetic flow metering give certification-grade data rather than approximate readings.
  • Servo Torque and Force Control – 0–6 N·m torque and force sensing with ±0.5 mm or ±0.5° displacement accuracy reproduce real actuation precisely.
  • Auto-Calculated Cartridge Geometry – The servo drive computes the valve spindle angle and centre position, removing manual setup error between operators.

 

Applications​

  1. Single-handle faucets
  2. Dual-control and double-handle faucets
  3. Thermostatic faucets
  4. Touchless / non-contact faucets
  5. Pull-out faucets and rotating spouts
  6. Shower function switching and ball-joint connections

Industries

  1. Faucet and sanitary ware manufacturing
  2. Plumbing fitting and valve OEM/ODM
  3. Third-party testing and certification bodies
  4. Sanitary ware brand R&D centers
  5. Faucet component and cartridge suppliers
  6. Sanitary ware importers and trading companies
Parameter Specification
Model (待补型号)
Application Endurance / life testing of conventional, thermostatic and touchless faucets
Test Items Single/dual handle, double handle, bath lift, rotating spout, pull-out, shower function switching, ball-joint swing and switching force
Fixtures Modular, flexible combination
Power Supply 3-phase 4-wire AC 380 V (heating / cooling / pump); other circuits AC 220 V, earthed
Compressed Air External, 0.3–0.6 MPa (43–87 psi)
Cold Water Supply 5–30 °C, 0.1 °C display, insulated tank + chiller
Hot Water Supply Ambient–90 °C, 0.1 °C display, insulated tank + in-line heater
Pressure Sensor 0–1.0 MPa, 0.2 class
Flow Meter Electromagnetic, 0.5 class, 50 L/min
Temperature Sensors Cold 0–50 °C, hot 0–100 °C, Class A
Servo Torque 0–6 N·m, ±0.1 N·m, 0.5 class
Tension/Compression Sensor Force measurement, 0.5 class
Displacement Accuracy ±0.5 mm or ±0.5°
Action Speed 0.5°/s–65°/s, adjustable
Pump Pressure 0.02–1.0 MPa; stability ±0.05 MPa (<0.5 MPa), ±0.1 MPa (>0.5 MPa); display 0.001 MPa
Pneumatic Drive 0–100 N, 0.5 class, 0–100 mm/s
Water Temperature Control ±2.5 °C, 0.1 °C display
Applicable Standards ASME A112.18.1/CSA B125.1, EN 200, EN 817, EN 1111, EN 246, GB 18145, GB/T 41863, CJ/T 194, AS 3718, SANS 226, TISI 2067, SASO EN 246

展示1 展示2 展示3 展示4 展示5


  • Previous:
  • Next:

  • Write your message here and send it to us