Taber-Type Rotary Abrasion Tester

Short Description:

This TABER Abrasion Testing Machine evaluates the wear resistance of a wide range of materials, including plastics, coatings, textiles, rubber, laminates, leather, and paper. It operates by rotating a flat, mounted specimen under two weighted abrasive wheels, generating a precise wear pattern to measure mass loss, thickness reduction, or visual degradation according to standardized test methods such as ASTM D4060, ISO 5470, and other industry-specific protocols.

ASK FOR FREE QUOTE

Product Detail

Product Tags

Product Advantages

One Bench, Many Materials – With interchangeable wheels and holders, the same unit tests textile, rubber, coatings, laminate, paper and leather without additional frames.
Standard Wear Track Geometry – 88.9 mm outer and 63.5 mm inner track with 63.5 mm wheel spacing reproduces the geometry specified in ASTM and ISO abrasion methods.
Three Load Levels – 250 g, 500 g and 1000 g arms cover light textile wear through aggressive coating and floor abrasion in one setup.
Continuous Dust Extraction – A 3 mm gap at the wear zone removes debris during the run, avoiding wheel clogging that causes falsely low wear results.
Mass-Loss Based Evaluation – Results are expressed as weight difference before and after abrasion, giving a quantitative value rather than a subjective visual rating.
Compact and Portable – The 20 kg body fits on any bench and can be moved between test areas, unlike floor-standing abrasion rigs.

Product parameters
1	Test piece	Φ108mm, thickness 3mm
2	Load	250,500,1000g
3	Wear wheel	Φ50.8mm,(W)12.7mm
4	Center spacing of the wear wheels	63.5mm
5	Between the wear wheel and the center of the test piece	37 to 38mm
6	Wear wheel track	Outer diameter 88.9mm, inner diameter 63.5mm
7	Rotational speed	60r/min
8	Timer	LCD,0 to 999,999(6-digit)
9	Distance between the test piece and the dust suction port	3mm
10	Volume	553232cm(WDH)+ vacuum cleaner
11	Weight	20kg(excluding vacuum cleaner)
12	Power supply	1∮,AC 220V,5A