Midziyo Yekuongorora Hunyoro Husingaperi uye Tembiricha Isingaperi Mufananidzo Wakaratidzwa

Midziyo Yekuongorora Hunyoro Hwakasimba uye Kupisa Kwakasimba

Tsananguro pfupi:

Kamuri rekuyedza tembiricha nehunyoro rinogara riripo mudziyo wekuyedza kuvimbika unotevedzera nzvimbo dzakasiyana dzetembiricha nehunyoro. Rinoshandiswa zvakanyanya mumaindasitiri akadai semagetsi, midziyo yemagetsi, zvikamu zvemotokari, hardware, uye zvinhu zvemakemikari. Nekuisa tembiricha dzakasiyana-siyana, hunyoro, uye shanduko, rinotevedzera mamiriro ekunze akadai sekutenderera kwetembiricha yepamusoro/pasi uye hunyoro kuti riedze kugadzikana kwekushanda kwechigadzirwa, kuramba kwemamiriro ekunze, uye hupenyu hwebasa pasi penzvimbo dzakanyanya kupisa nehunyoro kana dzakachinjana. Rinobatsira mabhizinesi kuona mhando yechigadzirwa, kugadzirisa dhizaini, uye kuderedza njodzi dzekushandiswa pamusika.

Bvunza Mutengo wemahara

Ruzivo rweChigadzirwa

Matagi eChigadzirwa

Zviyero zvechigadzirwa
1	Tembiricha yekudziya	- 70 ℃~+150 ℃ (T: – 20 ℃, F: – 40 ℃ S: – 70 ℃)
2	Hunyoro hwemvura	20% – 98% RH (10% – 98% RH/5% – 98% RH isarudzo dzakakosha)
3	Kurongeka/kufanana kwekuongorora tembiricha nehunyoro	± 0.1 ℃; RH/± 1.0 ℃; RH
4	Kururama/kuchinja-chinja kwekutonga tembiricha nehunyoro	± 1.0 ℃; RH/± 0.5 ℃; RH
5	Nguva yekudziyisa/kutonhodza	inenge 4.0 ℃/miniti; Inenge 1.0 ℃/min (5~10 ℃/min yekusarudza kwakakosha)
6	Zvinhu zvemukati nekunze	Muchina wese wakagadzirwa nemaplate esimbi anotonhorera, akapfapfaidzwa nemapurasitiki, enamel yakabikwa SUS 304 # stainless steel plate mhute pamusoro, uye bhokisi remukati rakagadzirwa nesimbi isina tsvina
7	Zvinhu zvekudzivirira kupisa	Zvinhu zvinodzivirira furo revinyl formate rinopisa zvakanyanya uye rinogara kwenguva refu
8	Sisitimu yekutonhodza	Compressor inotonhorerwa nemhepo/chikamu chimwe chete (- 0 ℃~- 40 ℃), compressor inotonhorerwa nemhepo nemvura/chikamu chechipiri (- 40 ℃~- 70 ℃)
9	Chidziviriro	switch isiri fuse, compressor overload protection switch, refrigerant high ne low pressure protection switch, over-humidity and over-temperature protection switch, fuse, fault yambiro system
10	Zvishandiso	Chinorekodha (sarudzo), hwindo rekuona, gomba rekuyera re50mm, rambi riri mubhokisi rePL, chikamu, gauze rebhabhu rakanyorova uye rakaoma
11	Mutongi	Chigadzirwa cheKorea "TEMI" South Korea "TEMI" kana kuti "OYO" cheJapani Chisarudzo
12	Compressor	Chiratidzo cheFrance che "Taikang"
13	Magetsi	1 Φ 220VAC ± 10% 50/60Hz&3 Φ 380VAC ± 10% 50/60Hz

Zvakajairika
1	GB1158 Mamiriro Ehunyanzvi eChamber Yekuyedza Inodziya Nekupisa Kwakanyanya
2	GB10589-2008 Mamiriro Ehunyanzvi eChamber Yekuyedza Yekupisa Kushoma
3	GB10592-2008 Mamiriro Ehunyanzvi eChamber Yekuyedza Tembiricha Yakakwira Neyakaderera
4	GB/T10586-2008 Mamiriro eUnyanzvi eChamber yeKuedza Kupisa Kwemvura Yakanyorova
5	GB/T2423.1-2009 Nzira yekuyedza kamuri yekuyedza ine tembiricha yakaderera
6	GB/T232.2-2009 Nzira yekuyedza kamuri yekuyedza ine tembiricha yepamusoro
7	GB/T2423.3-2008 Nzira Yekuyedza yeChamber Yekuyedza Kupisa Kwakanyorova
8	GB/T2423.4-2008 Nzira yekuedza kupisa kwakanyorova inochinjana
9	GB/T232.2-2008 Nzira Yekuyedza Yekuchinja Tembiricha
10	IEC60068-2-2.005 Nzira yekuyedza kamuri yekuyedza ine tembiricha yakaderera
11	IEC60068-22.2005 Nzira yekuyedza kamuri yekuyedza ine tembiricha yepamusoro
12	GJB150.3A bvunzo yekupisa kwakanyanya
13	GJB150.4A bvunzo yekupisa kwakaderera
14	GJB150.9A bvunzo yehunyoro nekupisa

MaModheru & Magadzirirwo Aripo
Muenzaniso	LT-TH-80	LT-TH-150	LT-TH-225	LT-TH-408	LT-TH-800	LT-TH-1000
Zviyero zvekunze WHD (cm)	90x136x94	100x146x104	100x161x117	110x171x137	150x186x137	150x186x157
Zviyero zvemukati WHD (cm)	40x50x40	50x60x50	50x75x60	60x85x80	100x100x80	100x100x100
magetsi	1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz