LT-CZ 28 Crank and tooth disc
Technical parameters |
1. Air pressure cylinder diameter: Φ 63mm |
2. Air pressure cylinder stroke: 200mm |
3. Use of air pressure source: 6kg / sq.cm |
4. Force sensor: 500kg 2 units |
5. Maximum test frequency: 5Hz |
6. Human-machine interface operation controller: 1 group |
7. Treatment: 1 group of crank test and tooth disc test |
8. Test the break-down and stop induction device: 1 group |
9. Test height: manually adjust it |
10.T Type slot: lifting fixed seat |
Standards |
ISO 4210, JISD-9415, DIN 79100 Article 5.8.2 |
Write your message here and send it to us