LT-YW-90W Salt spray test chamber

Short Description:

The salt spray test chamber conducts standardized tests on plated, coated, or oil-treated surfaces by simulating a corrosive salt fog environment. It aims to accurately quantify corrosion resistance, providing reliable data for quality control and process improvement.

ASK FOR FREE QUOTE

Product Detail

Product Tags

Product parameters
1	Laboratory temperature	35 ℃ ± 1 ℃ for saline test method (NSS ACSS)/50 ℃ ± 1 ℃ for corrosion test method (CASS)
2	Pressure drum temperature	salt water test method (NSS ACSS) 47 ℃ ± 1 ℃/corrosion resistance test method (CASS) 63 ℃ ± 1 ℃
3	Brine temperature	35 ℃± 1 ℃ 50 ℃± 1 ℃
4	Saline water concentration	0.26 g copper chloride (CuCl2 2H2O) per liter shall be added to 5% sodium chloride solution or 5% sodium chloride solution
5	Compressed air pressure	1.00 ± 0.01kgf/cm2
6	Spray volume	1.0~2.0ml/80cm2/h (collect at least 16 hours and take the average value)
7	Relative humidity of laboratory	above 85%
8	PH value	6.5~7.2 3.0~3.2
9	Spray mode	continuous spray

Standard
1	GB/T 2423.18-2000 Alternate Salt Spray Test Method
2	GB/T 6461-2002 Grade Evaluation
3	ASTM.B117-2009 Salt spray test
4	JIS H8502 Saline spray test method
5	IEC 60068-2-11-1981 Salt spray test
6	IEC 68-2-52 1996 Salt spray test
7	GB/T 6461-2002 Standard for Salt Spray Test Evaluation
8	ISO 9227-2006 Saline spray test method
9	GB/T 12967.3-91 CASS Accelerated Acetate Fog Test
10	QB/T 3828-1999 Copper salt accelerated acetic acid salt spray test
11	GB/T 5170.8-2008 Test Methods for Salt Spray Test Equipment
12	GB/T 5170.11-2008 Inspection Methods for Corrosive Gas Test Equipment
13	GJB 150.11A-2008 Salt spray test method
14	GB/T 2423.17-2008 Test Method for Salt Spray
15	GB/T 10587-2006 Technical Conditions for Salt Spray Test Chamber
16	CNS 8886-2002 Salt spray corrosion degree judgment
17	CNS 4159 Copper acetate salt water spray test method
18	CNS 4158 Brine spray test method